Energy Performance of Fuzzy Logic Controllers in Smart Buildings

Authors

  • Ali Baniyounes Applied Science Private University
  • Yazeed Ghadi Al Ain University of Science and Technology
  • Ayman Abu Baker Applied Science Private University

Abstract

This article presents simulation study on using fuzzy logic based controllers in order to determine building's occupancy level and hence its effect on energy usage. The projected results of energy savings then is used to determine and investigate the proposed fuzzy logic based control system environmental and economic aspects. The proposed system energy performance are measured based on the system occupancy density level, Daylight utilization and natural ambient air and humidity. The simulation and modelling engines used in this article are MATLAB and EnergyPlus. Results showed that system will save 14% of total energy demand at 50 % of occupancy level compared to total energy demand at full occupancy level (100% occupancy level) and also it is able to save 24% of total energy demand at 25 % of occupancy level compared to full occupancy level energy demand (100% occupancy level).Keywords: Daylight, Occupancy level, Fuzzy logicJEL Classifications: K32, O13DOI: https://doi.org/10.32479/ijeep.6393

Downloads

Download data is not yet available.

Downloads

Published

2018-12-07

How to Cite

Baniyounes, A., Ghadi, Y., & Abu Baker, A. (2018). Energy Performance of Fuzzy Logic Controllers in Smart Buildings. International Journal of Energy Economics and Policy, 9(1), 41–47. Retrieved from https://mail.econjournals.com/index.php/ijeep/article/view/6393

Issue

Vol. 9 No. 1 (2019)

Section

Articles

License

Submission of an article implies that the work described has not been published previously , that it is not under consideration for publication elsewhere, that its publication is approved by all authors and tacitly or explicitly by the responsible authorities where the work was carried out, and that, if accepted, will not be published elsewhere in the same form, without the written consent of the Publisher. The Editors reserve the right to edit or otherwise alter all contributions, but authors will receive proofs for approval before publication.